...
| Table of Contents |
|---|
...
Relevant Devices
Description | Qty | Source | Part Number |
|---|---|---|---|
Network Switches | 7 | Aruba/HP | HP-2530-24G |
...
Relevant Functional Block Diagram
...
Software Actions
Action | Notes | |
|---|---|---|
| 1 | None Required | |
...
Required Adjustable Settings
Setting | When Needed | Notes | ||
|---|---|---|---|---|
Build | Observing | Maintenance | ||
None Required | ||||
...
Required Telemetry
Parameter | Report Frequency | Purpose | Notes | |
|---|---|---|---|---|
| 1 | None Required | |||
...
Required Alarms
Parameter | Threshold | Notes | |
|---|---|---|---|
| 1 | None Required | ||
...
Relevant Datasheets & Manuals
Description | File | Source | |||||
|---|---|---|---|---|---|---|---|
| 1 | 2530 Series Datasheet |
| https://www.arubanetworks.com/products/networking/switches/2530-series/ | ||||
| 2 | Basic Operations Guide for Switches with our Firmware Version. |
| |||||
| 3 | Management and Configuration Guide for Switches with our Firmware Version |
|
...
Installation Instructions
NOTE: the switch is by default set up for DHCP. In this state the only way to connect to the switch to change any settings is via a console cable (as described below).
Once the switch has a static IP address set, you can connect to it for command-line sessions using PuTTy (using its static IP on port 22).
Description | File | ||||
|---|---|---|---|---|---|
How to set up an HP network switch with a hard-set IP address. Allows access to the switch’s web interface by typing its IP address into a browser. |
|