...
| Table of Contents |
|---|
...
Page Status
Nearly complete.
...
Introduction
...
Relevant Devices
...
Relevant Functional Block Diagram update to remove second instance
...
Software Actions
Action | Notes | |
|---|---|---|
| 1 | Read temperature values from all sensors | |
| 2 | ||
| 3 |
...
Setting | When Needed | Notes | ||
|---|---|---|---|---|
Build | Observing | Maintenance | ||
Sensor location table(s) | YES | NO | MAYBE | |
Sensor Read Frequency | YES | NO | MAYBE | |
...
Device Setup Parameters
| View file | ||
|---|---|---|
|
...
Description | File | Source | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
LinkHub_E_python.py is the main program. LinkHub_E_commands.py contains functions called by the main program. This code finds all of the sensors connected to the LinkHub E, and then reads their values. Note first reading might report all temperatures as ‘85’; this seems to be a consequence of the first read to find sensor IDs. |
| Python code originally written by Y. Ishikawa (SSL). Simplified by S. Gibson to remove sections not relevant to KPF. |
...
Installation Instructions
Description | File | ||||
|---|---|---|---|---|---|
Instructions on how to change the device’s IP address over Telnet |
|