Table of Contents:
...
Parameter (SDK Command) | Purpose | Notes | ||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
| Logs which hardware was used for each image. Mainly useful if we have to replace the detector at some point (keeps track of which detector was used when) | ||||||
| 2 |
| |||||||
| 3 |
| |||||||
| 4 |
| Returns info about PCB cards. I don’t think this is used with USB cameras. | ||||||
| 5 |
| |||||||
| 6 |
| |||||||
| 7 |
| |||||||
| 8 |
| |||||||
| 9 |
|
...
SDK Command | Value | Notes | |||||||
|---|---|---|---|---|---|---|---|---|---|
| 1 |
| 1 - Single Scan | This is the only mode KPF will use. | ||||||
| 2 |
| Enabled | Enabling baseline clamp ensures that the bias level does not change between images. | ||||||
| 3 |
| 7 - External Exposure (bulb) | All exposure times controlled via the Galil | ||||||
| 4 |
| 4 - Image | This is the only read mode KPF will use. | ||||||
| 5 | Horizontal Clock Speed | 0.5MHz | |||||||
| 6 | Vertical Clock Speed | 51.3 microseconds | |||||||
| 7 |
| 2 | |||||||
| 8 | Subframe |
(move to adjustable parameter section?) | We will end up taking a subframe in the horizontal 1024 pixel direction. Vertical direction will be full frame. | ||||||
| 9 | Binning | 1x1 (none) (move to adjustable parameter section?) | We will never bin in standard mode (but it wouldn’t hurt to have the option in case some unique user comes along) | ||||||
| 10 |
| 0 - Return to ambient on shutdown | Sets cooler behaviour on shutdown |
...
Description | File | Source | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Capability list for our Newton (terse and verbose versions) |
| Will Deich’s query program | ||||||||
| 2 | Andor SDK 2 Manual Note SDK 2 is what we need as it’s for CCD detectors (SDK 3 is for CMOS detectors). |
| Direct link for these file sent by Andor sales rep (Mike Zemlan) | ||||||||
| 3 | Andor SDK 2 (for CCDs) for Linux |
| |||||||||
| 4 | Andor SDK 2 (for CCDs) for Windows |
|