...
Description | Qty | Source | Part Number | IP Address Link |
|---|---|---|---|---|
Green CCD Cold Head | 1 | Instec | mK2000 | |
Red CCD Cold Head | 1 | Instec | mK2000 | |
Green LN2 Pump | 1 | Instec | LN2-SYS | N/A |
Red LN2 Pump | 1 | Instec | LN2-SYS | N/A |
...
Action | Notes | |
|---|---|---|
| 1 | Read telemetry (Green) | Continuously running |
| 2 | Read telemetry (Red) | |
| 3 | Upload PID parameter table (Green) | Engineering and maintenance only |
| 4 | Upload PID parameter table (Red) | |
| 5 | Cool-down procedure (Green) | Engineering and maintenance only |
| 6 | Cool-down procedure (Red) | |
| 7 | Warm-up procedure (Green) | Engineering and maintenance only |
| 8 | Warm-up procedure (Red) |
...
Operational Modes [TBD]
Link to Instec tab within Operational Modes Spreadsheet
No modes yet for controller (always on device??)
...
Required Adjustable Settings
...
Description | File | Source | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Instec said: “While we do have sample code for Python, it is based on a USB connection, not Ethernet. Our documentation on Ethernet programming is limited because it isn’t very frequently used for custom applications. This ZIP file contains example code for python using a USB connection. It could serve as the basis for an ethernet version.” |
| email from Instec | ||||||||||||
| 2 | Ethernet communication setup from Instec. Mainly describes how to write code to find Instec devices on a network. Note PacketSender image within, which shows correct port to use for ethernet communication. |
| email from Instec | ||||||||||||
| 3 | PacketSender connection example |   | Screengrab of SG’s successful connection to device through PacketSender. Note port is 50292. | ||||||||||||
| 4 | Instec App for Windows |
| email from Instec | ||||||||||||
| 5 | Steve’s python code that uploads a PID table from a .csv file (in Instec format) to the device over USB. Example PID tables also included (one with actual values, and one with integers that was useful for testing code). | Code:
PID files:
|