Content Comparison

...

...

Relevant Devices

Notes:

• For “Location Requirement” column, “Close” = beside or above etalon; “Far” = ~4 m from etalon

• For “Controlling Software” column, “Etalon” = etalon PC; “KPF” = KPF control software

Notes:

• For “Rack Mount” column:

  • “Y” = device designed for 19” rack mounting;

  • “N” = device would have to sit on a rack shelf

• For “Location Requirement” column:

  • “Close” = must be located beside or above the etalon;

  • “Far” = could be located ~4 m from etalon

• For “Controlling Software” column:

  • “Etalon” = device is only controlled by software on etalon PC;

  • “KPF” = device needs to be controlled by KPF instrument control software

...

Relevant Functional Block Diagram

Is this diagram still correct?

...

Visio version of above diagram:

...

Software Actions

List of etalon items actions that the KPF instrument control software will need to perform (i.e. move something, read a value, measure something, etc.)

...

Required Software-Adjustable Settings

List all of etalon device settings that the KPF instrument control software would need to control .
Note: Settings that are only required between the etalon devices and the etalon PC do not need to be included hereor change.

...

Required Telemetry

List all of etalon telemetry that the KPF instrument control software should monitor, save, or put into make available for image headers. Note: Telemetry that is only required by the etalon PC do not need to be included here.

...

Required Alarms

Etalon telemetry items that should have a KPF instrument software alarm raised when telemetry passes a threshold value.

...