...
Connector Number | Lakeshore Channel | KTL Keyword |
|---|---|---|
1 | Green Lakeshore D2 | CRYOSTAT_G1 Within cryostat; likely on detector mounting plate to one side of CCD (opposite side to CRYOSTAT_G3) |
2 | Green Lakeshore D3 (not functioning) | CRYOSTAT_G2 Within cryostat; likely at the detector end of the cold strap |
3 | Green Lakeshore D4 | CRYOSTAT_G3 Within cryostat; likely on detector mounting plate to one side of CCD (opposite side to CRYOSTAT_G1) |
...
Connector Number | Lakeshore Channel | KTL Keyword |
|---|---|---|
1 | Red Lakeshore D2 | CRYOSTAT_R1 Within cryostat; likely on detector mounting plate to one side of CCD (opposite side to CRYOSTAT_R3) |
2 | Red Lakeshore D3 (not functioning) | CRYOSTAT_R2 Within cryostat; likely at the detector end of the cold strap |
3 | Red Lakeshore D4 | CRYOSTAT_R3 Within cryostat; likely on detector mounting plate to one side of CCD (opposite side to CRYOSTAT_R1) |
...
Description | Details | Notes | ||||
|---|---|---|---|---|---|---|
Instec Sensor and Heater Cable |
 | Custom 30-ft long DB15 cable made by Instec. This goes between the Instec Controller and the vacuum feedthru on the main vacuum chamber. Within the chamber there is a second cable between the vacuum feedthru and the Instec Cold Head, however that cable is hard-wired into the Cold Head and not removable. | ||||
Cryostat Harness |
| Description of the various sensor and heater cables that go to the cryostat. |