Content Comparison

...

Here is a list of the actions that make up the MOSFIRE testAll

• Status
  colour Red title NOT a KEYWORD

  Ping various computer/network hardware to confirm they are alive

  • kaimama

  • control1

  • eds1

  • mpulizzi1

  • mpulizzi2

  • iolan1, control1, eds1, mpulizzi1, mpulizzi2, iolan1

• Status
  colour Green title IS A KEYWORD

  Check lastalive keyword on software (Servers)

  • mosfire, mcsus, mdhs, mds, mfcs, mmdcs, mmf1s, mmf2s, mmgss, mmgts

  • mmprs

  • mp1s

  • mp2s

  • mpas

  • mscs

  • mtcs, mmprs, mp1s, mp2s, mpas, mscs, mtcs

• Status
  colour Red title NOT A KEYWORD

  Verify PIDs exist for software

  • write_image

  • fcstrack

  • ds9relay

  • lickserv, fcstrack, ds9relay, lickserv

• Status
  colour Green title IS A KEYWORD

  Check daemons (only if observing)

  • watchrot

  • watchslew

  • watchfcs

  • autodisplay, watchslew, watchfcs, autodisplay

• Status
  colour Green title IS A KEYWORD

  Verify power status

  • glycol_power = on, CSU_controller_power = on, CSU_drives_power = on, Jade2_power = on, computer_power = on, Lantronix_power = on, guider_focus_power = on, ion_pump_power = on, MAGIQ_guider_power = on, temp_control_power = on, motor_box_power = on, power_supply_power = on, FCS_controller_power = on, dewar_heater_power = on, CCR_1_power = on, CCR_2_power = on

• Status
  colour Green title IS A KEYWORD

  Verify stages

  • dust cover, : mmdcs status is OK, filter wheel 1, : mmf1s status is OK, filter wheel 2, : mmf2s status is OK, grating turret, : mmgts status is OK, grating shim, : mmgss status is OK, pupil rotator, : mmprs status is OK or TRACKING, CSU, : mcsus status is OK

• Status
  colour Green title IS a KEYWORD

  Check Settings

  • glycol flow (mdhs glysup = Flow)

  • detector temp (mtcs curtmp1 = 77 +/- 0.1)

  • bulkhead temp (mtcs curtmp2 = 120 +/- 1)

  • CCR remote control (mscs chremote = 1)

  • CCR 1 Speed (mscs dacout1r = 45 +/- 1)

  • CCR 2 Speed (mscs dacout2r = 45 +/- 1)

  • window heater voltage (mdhs tmp5 = 17.5 +/- 1.5)

  • CSU electronics temp (mdhs tmp2 = 0-30)

  • cabinet temp (mdhs tmp3 = 0-30)

  • thermocouple pressure (mpas g1str = 0-1e-4)

  • ion pump 1 pressure (mpas g3str = 0 - 1e-7)

  • ion pump 2 pressure (mpas g4str = 0 - 1e-7)

  • cabinet door status (mdhs ebaydoor = Closed)

  • FCS correcting (mfcs active = 1)

  • datataking system (mds ready = 1)

  • current instrument (dcs currinst = mosfire)

...