Sub-system

Function

Physical Location

Status

Keyword Control

CCD controller power supply

CCD control crate

Footlocker inside HIRES enclosure. Power cord goes through wall into Old K1 laser enclosure.

PDU Installed:

PDU: KB_A1

…48G-K1Laser …82.54 port 28

needs implementation

Fan Control

Cooling for CCD controller

Footlocker in HIRES enclosure. This is part of the same power cable for the Footlocker. Single PDU connects both.

PDU Installed

(same one as footlocker):

PDU:KB_A1

…48G-K1Laser …82.54 port 28

needs implementation

Motor Control crate power supply

Motor control Crate

Old K1 laser enclosure on K1 Platform

PDU Installed:

PDU: KB_A3

…48G-K1Laser 192.168.82.54 port 26

needs implementation

Exposure Meter

Separate system used for controlling exposure time to achieve a desired S/N

Old K1 laser enclosure on K1 Platform

PDU Installed:

KA_A6

needs implementation

Terminal Server

For access to the motor crate

Old K1 laser enclosure on K1 Platform

PDU Installed:

KA_A1

needs implementation

Fiber RS232 to Serial ConverterConverter1

Fiber to/from serial conversion

Old K1 laser enclosure on K1 Platform

PDU Installed:

KA_A4

needs implementation

Fiber RS232 to Serial ConverterConverter2

Fiber to/from serial conversion

Old K1 laser enclosure on K1 Platform

PDU Installed:

KA_A5

needs implementation

Ethernet Converter

10 Base 2 to/from ethernet converter

PDU Installed:

KA_A3

needs implementation

HIRES server (“lehoula”)

Main computer server for the instrument

K1 computer room

PDU installed (Jet Dee)