...
Sub-system PDUs (needed and/or already installed)
Sub-system | Function | Physical Location | Status |
Keyword Control |
Status
05:04
00:15
Sunset/Dome open
05:19
02:00
PCS: fine screen, phasing
07:20
00:10
Switch to OSIRIS
07:30
00:30
Basic AO/OSIRIS checkout
Stability
IQ on bright star
08:00
01:00
OSIRIS HAM Check
HD 90700 (single)
HD 90823 (double)
09:00
01:00
OSIRIS post-service
Server functionality post OS upgrade
Orientation
Offsets between OSPEC/OSIMG
Offsets between OSPEC scales
10:00
01:00
OSIRIS Tellurics w/ & w/o TRICK dichroic
Mostly SPEC
Simultaneous IMAG if can
11:00
01:00
OSIRIS blank sky for wavelength solution
12:00
01:00
Repeat Tellurics or Imager throughputs as function of pupil
13:00
00:10
Switch to SSC
13:10
00:50
45-star pointing test CW
14:00
00:50
45-star pointing test CCW
14:52
-
12-degree twilight
15:33
-
CCD controller power supply | CCD control crate | Footlocker inside HIRES enclosure. Power cord goes through wall into Old K1 laser enclosure.  | PDU Installed: PDU: KB_A1 …48G-K1Laser …82.54 port 28 | needs implementation |
Fan Control | Cooling for CCD controller | Footlocker in HIRES enclosure. This is part of the same power cable for the Footlocker. Single PDU connects both. | PDU Installed (same one as footlocker): PDU:KB_A1 …48G-K1Laser …82.54 port 28 | needs implementation |
Motor Control crate power supply | Motor control Crate | Old K1 laser enclosure on K1 Platform   | PDU Installed: PDU: KB_A3 …48G-K1Laser 192.168.82.54 port 26 | needs implementation |
Exposure Meter | Separate system used for controlling exposure time to achieve a desired S/N | Old K1 laser enclosure on K1 Platform  | PDU Installed: KA_A6 | needs implementation |
Terminal Server | For access to the motor crate | Old K1 laser enclosure on K1 Platform  | PDU Installed: KA_A1 | needs implementation |
RS232 to Serial Converter1 | Fiber to/from serial conversion | Old K1 laser enclosure on K1 Platform  | PDU Installed: KA_A4 | needs implementation |
RS232 to Serial Converter2 | Fiber to/from serial conversion | Old K1 laser enclosure on K1 Platform  | PDU Installed: KA_A5 | needs implementation |
Ethernet Converter | 10 Base 2 to/from ethernet converter |  | PDU Installed: KA_A3 | needs implementation |
HIRES server (“lehoula”) | Main computer server for the instrument | K1 computer room   | PDU installed (Jet Dee) |