Versions Compared

Version Old Version 3 New Version Current
Changes made by

Greg Doppmann

Greg Doppmann

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Sub-system PDUs (needed and/or already installed)

Sub-system

Function

Physical Location

Status

Keyword Control

  1. Flatlamp

  2. Arclamp

  3. nsmotor2 Galil

  4. nspec H2RG SAM

  5. nscam H2RG SAM

  1. Internal flatfielding

  2. Internal wavelength calibration

  3. Motor control for all mechanisms inside dewar

  4. SPEC detector controller (UPS connected)

  5. SCAM detector controller (UPS connected)

In the electronics bay located below the dewar on the instrument. Power Strip A

PDU Installed

  1. nspower1:OUTLET_A1

  2. nspower1:OUTLET_A2

  3. nspower1:OUTLET_A3

  4. nspower1:OUTLET_A7

  5. nspower1:OUTLET_A8

  1. Forward hear exchanger

  2. MAGIQ Guider

  3. FEU Flip mirror

  4. FEU TipTilt

  5. FEU Zaber

  1. Cooling for electronics

  2. Annular Guider (optical)

  3. Defunct (not used)

  4. Defunct (on KPIC AO bench now)

  5. Defunct (on KPIC AO dench bench now)

In the electronics bay located below the dewar on the instrument. Power Strip B

PDU Installed

  1. nspower2:OUTLET_B1

  2. nspower2:OUTLET_B3

  3. nspower2:OUTLET_B6

  4. nspower2:OUTLET_B7

  5. nspower2:OUTLET_B8

  1. nsdewar1 Lakeshore 336

  2. nsdewar2 Lakeshore 336

  3. nsdewar3 Laeshore 218

  4. nsdewar4: Varian

  1. Temperature control

  2. Temperature control

  3. Temeprature Temperature control

  4. Vacuum pressure gauge

In the electronics bay located below the dewar on the instrument. Power Strip C

PDU Installed

  1. nspower3:OUTLET_C1

  2. nspower3:OUTLET_C2

  3. nspower3:OUTLET_C3

  4. nspower3:OUTLET_C4

  1. nsdewar1 Lakeshore 336

  2. nsdewar2 Lakeshore 336

  3. nsdewar3 Laeshore 218

  4. nsdewar4: Varian

  1. Temperature control

  2. Temperature control

  3. Temeprature control

  4. Vacuum pressure gaugeTerminal Server

  5. Network Switch

  6. nsmotor1 Galil

  7. nsmotor3 ADAM 6066

  8. Rear Heat exchanger

  1. Connected to the detector control crates above

  2. On-instrument internal network

  3. Control for Cal Unit mechanisms (outside cryogenic dewar)

  4. Control for variable brightness of Flatfield lamp bulb

  5. Cooling for electronics

In the electronics bay located below the dewar on the instrument. Power Strip CD

PDU Installed

  1. nspower3nspower4:OUTLET_C1D1nspower3

  2. nspower4:OUTLET_C2D2

  3. nspower3nspower4:OUTLET_C3D3nspower3

  4. nspower4:OUTLET_C4

Amplifiers

Part of the mechanism control?

Old K1 laser enclosure on K1 Platform

PDU Needed

N/A

Interconnect

Another aspect of the mechanism control?

Old K1 laser enclosure on K1 Platform

PDU Needed

N/A

Exposure Meter

Separate system used for controlling exposure time to achieve a desired S/N

Old K1 laser enclosure on K1 Platform

PDU Needed

N/A

Terminal Server

For access to the control crates

Old K1 laser enclosure on K1 Platform

PDU Needed

N/A

Ethernet Converter

Fiber to/from ethernet conversion

Old K1 laser enclosure on K1 Platform

PDU Needed

N/A

Serial Converter

Fiber to/from serial conversion(?)

Old K1 laser enclosure on K1 Platform

PDU Needed

N/A

“Cylinder control”

Unknown what this is or does. Has a sticker on it saying “HIRES”

Old K1 laser enclosure on K1 Platform. This has its own separate outlet

PDU Needed

N/A

HIRES server (lehoula)

Main computer server for the instrument

K1 computer room

PDU installed (Jet Dee)

TBD

  1. D4

  2. nspower4:OUTLET_D5

NIRSPEC server (“nirspecserver”)

Main instrument computer server

K2 computer Room

PDU installed

TBD (installed by Jet Dee recently)