...
Description | Qty | Source | Part Number | Notes |
|---|---|---|---|---|
Shutter Controller | 1 | Uniblitz | VED24 | |
Shutter | 1 | Uniblitz | NS65B1T0-VED | 65mm Optical Shutter Bi-stable (only requires power for transitions) Ordering Options:  Note: as of 2021 the electronic sync option was not available for this shutter. Uniblitz said that option was only possible for this shutter as part of a custom, large-quantity order. |
...
Relevant Functional Block Diagram
...
Cable | Qty | Details | ||||
|---|---|---|---|---|---|---|
Sci/Sky Scrambler Shutter (BNC) | 1 | |||||
Uniblitz Custom-Length 510F Cable | 1 |
|
...
Photos of Devices
...
Installation Instructions
The settings below must only be used for the NS65B shutter, or damage will result. |
The shutter controller has a set of DIN “Function Switches” (second from right in image below) and an Octal switch for “Pulse Duration” (far right in image below) that need to be configured for the particular shutter being used:
...
The function switch has the following settings:
...
For the DSS25B NS65B shutters the function switch and pulse duration settings are:
...
Note the setting for Switch 1 does not depend on the shutter type, but should be set to ‘UP’ for ‘LOCAL’ (this disables the USB port and enables the BNC Pulse Input):
Note also that there is also a toggle switch on the front that sets the ‘Normally Open’ or ‘Normally Closed’ polarity of the switch (second from left in image above). The manual is not clear on how this affects a bi-stable shutter. For consistency within KPF, all shutter controllers should be set to ‘N.O.’. Each KPF VED has a label on the front to indicate this, as show in the picture above.
...