Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 6 Next »


Table of Contents:


Relevant Devices

Description

Qty

Source

Part Number

Ion Pump Controller

4

Gamma

SPC-1-P-S-1-US110-E-S-N

Ion Pump

4

Gamma

3SDI1V5KNN (3S TiTan)

Air Cables

4

Vacuum Cables

4

Each pump has a dedicated controller.

Note there are two pumps per cryostat. One will be operated and the second will sit idle as a backup.


Relevant Functional Block Diagram

to be added


Software Actions

Action

Notes

1

Green controller 1: take pressure measurement

Value reported as telemetry (see below)

2

Green controller 2: take pressure measurement

Value reported as telemetry (see below)

3

Red controller 1: take pressure measurement

Value reported as telemetry (see below)

4

Red controller 2: take pressure measurement

Value reported as telemetry (see below)

5

Green controller 1: turn pump on

6

Green controller 1: turn pump off

7

Green controller 2: turn pump on

8

Green controller 2: turn pump off

9

Red controller 1: turn pump on

10

Red controller 1: turn pump off

11

Red controller 2: turn pump on

12

Red controller 2: turn pump off


Required Adjustable Settings

Setting

When Needed

Notes

Build

Observing

Maintenance


Required Telemetry

Parameter

Report Frequency

Purpose

Notes

1

Green controller 1 pressure value

Once per minute (TBC)

Monitor green cyrostat pressure

2

Green controller 2 pressure value

Once per minute (TBC)

Monitor green cyrostat pressure

3

Red controller 1 pressure value

Once per minute (TBC)

Monitor red cyrostat pressure

4

Red controller 2 pressure value

Once per minute (TBC)

Monitor red cyrostat pressure


Required Alarms

Parameter

Threshold

Notes

1

Green controller 1 pressure high

TBC

Only one pump per cyrostat will be in operation at any time.

The alarm system would need to know which pump/controller is in operation at any time to monitor the correct pressure value.

2

Green controller 2 pressure high

TBC

3

Red controller 1 pressure high

TBC

4

Red controller 2 pressure high

TBC


Relevant Datasheets & Manuals

Description

File

Source

1

SPC Controller Spec Sheet

https://www.gammavacuum.com/index.php/product?id=64

2

SPC Controller Manual

https://www.gammavacuum.com/index.php/product?id=64

3

SPC ModBus Register Map

https://www.gammavacuum.com/index.php/product?id=64

4

SPC Firmware

https://www.gammavacuum.com/index.php/product?id=64

5

SPC Labview Drivers
(likely not useful, but included for completeness' sake)

https://www.gammavacuum.com/index.php/product?id=64

  • No labels