Here is a list of the actions that make up the MOSFIRE testAll
Ping various computer/network hardware to confirm they are alive
kaimama
control1
eds1
mpulizzi1
mpulizzi2
iolan1
Check lastalive keyword on software (Servers)
mosfire
mcsus
mdhs
mds
mfcs
mmdcs
mmf1s
mmf2s
mmgss
mmgts
mmprs
mp1s
mp2s
mpas
mscs
mtcs
Verify PIDs exist for software
write_image
fcstrack
ds9relay
lickserv
Verify power status
glycol_power = on
CSU_controller_power = on
CSU_drives_power = on
Jade2_power = on
computer_power = on
Lantronix_power = on
guider_focus_power = on
ion_pump_power = on
MAGIQ_guider_power = on
temp_control_power = on
motor_box_power = on
power_supply_power = on
FCS_controller_power = on
dewar_heater_power = on
CCR_1_power = on
CCR_2_power = on
Verify stages
dust cover, mmdcs status is OK
filter wheel 1, mmf1s status is OK
filter wheel 2, mmf2s status is OK
grating turret, mmgts status is OK
grating shim, mmgss status is OK
pupil rotator, mmprs status is OK or TRACKING
CSU, mcsus status is OK
Check Settings
glycol flow (mdhs glysup = Flow)
detector temp (mtcs curtmp1 = 77 +/- 0.1)
bulkhead temp (mtcs curtmp2 = 120 +/- 1)
CCR remote control (mscs chremote = 1)
CCR 1 Speed (mscs dacout1r = 45 +/- 1)
CCR 2 Speed (mscs dacout2r = 45 +/- 1)
window heater voltage (mdhs tmp5 = 17.5 +/- 1.5)
CSU electronics temp (mdhs tmp2 = 0-30)
cabinet temp (mdhs tmp3 = 0-30)
thermocouple pressure (mpas g1str = 0-1e-4)
ion pump 1 pressure (mpas g3str = 0 - 1e-7)
ion pump 2 pressure (mpas g4str = 0 - 1e-7)
cabinet door status (mdhs ebaydoor = Closed)
FCS correcting (mfcs active = 1)
datataking system (mds ready = 1)
current instrument (dcs currinst = mosfire)
Here is the current () testAll script for MOSFIRE for reference.