Power Distribution Units (PDUs)

8-outlet Power Distribution Unit

EMAT08-10

16-outlet Power Distribution Unit

EMAU05-10

Configure module quick start guide

https://www.eaton.com/us/en-us/skuPage.EMAT08-10.resources.html

Operations Manual

https://www.eaton.com/us/en-us/skuPage.EMAT08-10.resources.html

Instruction Set Systems Object Manual

https://www.eaton.com/us/en-us/skuPage.EMAT08-10.resources.html

Technical Drawing

https://www.eaton.com/us/en-us/skuPage.EMAT08-10.resources.html

Visio Stencil

https://www.eaton.com/us/en-us/skuPage.EMAT08-10.resources.html

Double-wide Installation Quick Start Guide

https://www.eaton.com/us/en-us/skuPage.EMAT08-10.resources.html

1U and 2U rack mount installation addendum

https://www.eaton.com/us/en-us/skuPage.EMAT08-10.resources.html

Original collection of KPF PDU Serial Number Tags
NOTE: Labels, locations and IPs might have changed

Included as these are needed for default credentials (in case of reset)

Change the IP address and also the login account user name and password

Note that SNMP is required by the KTL Eaton dispatcher, however it is not enabled by default on the Eatons.

• In web interface, choose Network → SNMP at left of web interface page

• (Relevant section of web page shown in screen grab here).

• Set SNMP version to “SNMP V1&V3”
  (Default Port and Trap Port OK as-is)

• Click Save button (at right)

• In the SNMP V1 box, set:

  • public access = Read only

  • private access = Read-write

• In the SNMP V3 box, set:

  • Name the first user “kpfuser”

  • Access = read-only

  • Security level = noAuthNoPriv

  • ~~~~

  • Name the second user “kpfdev”

  • Access = Read-write

  • Security level = AuthNoPriv

  • Password = <usual kpfdev password, with “0” appended, to meet the Eaton password requirements)