Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Table of Contents

...

Introduction

Filter wheel and aperture wheel are the same device.

...

Relevant Devices

Descriptions

Qty

Source

Part Number

Notes

Filter Wheel

2

Thorlabs

FW102C

RS-232 connectivity

RS-232 to Ethernet Adapter

1

Lantronix

UDS2100

This is the version with two serial ports (and standard 9-pin RS-232 connectors)

Smaller Footprint Power Supply for Lantronix

1

Tri-Mag, LLC

Tri-Mag PN: L6R12H-120

DigiKey PN: 364-1264-ND

The stock Lantronix power supplies do not work well with the PDUs (as they block two extra outlets). KPF uses these replacement supplies since they only take up one PDU outlet.

Broadband Source

1

Thorlabs

SLS201L

See Broadband Calibration Sources

...

Cable

Qty

Details

Notes

Input Fiber

1

Thorlabs Custom Patch Cable
Fiber: FT1000EMT (0.39 NA; 400 – 2200 nm; 1000 um core)
Tubing: FT05SS (5mm diameter stainless steel tubing)
End 1: SMA
End 2: SMA
Length: 1 m

These were ordered using the Thorlabs custom fiber builder online: https://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=2410

Output Fiber

1

Thorlabs Custom Patch Cable
Fiber: FT800EMT (0.39 NA; 400 – 2200 nm; 800 um core)
Tubing: FT05SS (5mm diameter stainless steel tubing)
End 1: SMA
End 2: SMA
Length: 20 m

SMA-SMA Adapter

2

Thorlabs ADASMAV - Vacuum-Compatible SMA to SMA Mating Sleeve

One needed on external (air) side of flange, one needed on internal (vacuum) side

Vacuum Fiber

1

View file
nameTQ0425345.pdf

A 5m-long custom version of the standard 1m Thorlabs MV64L1.

Not This internal (vacuum) fiber is not shown on the diagram but included here for reference. This fiber carries light between the feedthrough above and the flat field fiber lens above the reformatter.

...

Pictures of Devices

...

Look-up Table for Filter Wheel Aperture Positions

...