...
Table of Contents:
| Table of Contents |
|---|
...
Introduction
Eaton PDUs are used throughout KPF, with one (or more) located at various locations throughout the system. They are controlled in software via the kpfpower KTL service.
...
Relevant Devices
Action
Description | Qty | Source | Part Number |
|---|---|---|---|
8-outlet Power Distribution Unit | 12 | Eaton | EMAT08-10 |
Relevant Functional Block Diagram
Software Actions
Required Telemetry
...
Parameter
...
Report Frequency
...
Purpose
...
Notes
...
Required Alarms
Parameter
Threshold
Notes
16-outlet Power Distribution Unit | 1 |
Required Adjustable Settings
...
Setting
...
When Needed
...
Notes
...
Build
...
Observing
...
Maintenance
Eaton | EMAU05-10 |
...
Relevant Datasheets & Manuals
Description | File | Source | |||||
|---|---|---|---|---|---|---|---|
| 1 | Configure module quick start guide |
| https://www.eaton.com/us/en-us/skuPage.EMAT08-10.resources.html | ||||
| 2 | Operations Manual |
| https://www.eaton.com/us/en-us/skuPage.EMAT08-10.resources.html | ||||
| 3 | Instruction Set Systems Object Manual |
| https://www.eaton.com/us/en-us/skuPage.EMAT08-10.resources.html | ||||
| 4 | Technical Drawing |
| https://www.eaton.com/us/en-us/skuPage.EMAT08-10.resources.html | ||||
| 5 | Visio Stencil |
| https://www.eaton.com/us/en-us/skuPage.EMAT08-10.resources.html | ||||
| 6 | Double-wide Installation Quick Start Guide |
| https://www.eaton.com/us/en-us/skuPage.EMAT08-10.resources.html | ||||
| 7 | 1U and 2U rack mount installation addendum |
| https://www.eaton.com/us/en-us/skuPage.EMAT08-10.resources.html | ||||
| 8 | Original collection of KPF PDU Serial Number Tags |
| Included as these are needed for default credentials (in case of reset) |
...
Installation Instructions
Description | File | ||||
|---|---|---|---|---|---|
Change the IP address and also the login account user name and password |
| ||||
Note that SNMP is required by the KTL Eaton dispatcher, however it is not enabled by default on the Eatons.
|  |