...
Table of Contents:
| Table of Contents |
|---|
...
Introduction
Eaton PDUs are used throughout KPF, with one (or more) located at various locations throughout the system. They are controlled in software via the kpfpower KTL service.
...
Relevant Devices
Required Adjustable Settings
...
Setting
...
When Needed
...
Notes
...
Build
...
Observing
...
Maintenance
...
PDU IP Address
...
Yes
...
No
...
Maybe
...
Outlet Status Update Rate
...
Yes
...
No
...
Maybe
...
Outlet Lock Status Update Rate
...
Yes
...
No
...
Maybe
Required Telemetry
...
Parameter
...
Report Frequency
...
Purpose
...
Notes
...
Outlet Status Change
...
1 / 5 sec
...
The frequency at which the outlet status is read.
...
Currently hardcoded to be 5 seconds. The web interface could change the outlet and it would take up to 5 seconds for that change to register.
...
Outlet Lock Status
...
1 / 5 sec
...
The frequency at which the outlet lock status is read.
...
Power draw
...
1 / 5 sec
...
The frequency at which the outlet power rate is read.
Required Alarms
Parameter
Threshold
Notes
Description | Qty | Source | Part Number |
|---|---|---|---|
8-outlet Power Distribution Unit | 12 | Eaton | EMAT08-10 |
Relevant Functional Block Diagram
Software Actions
...
Action
...
Notes
...
Turn on / off outlet
...
Core functionality, but can be controlled outside of the service via the administrator webpage
...
Register outlet state
...
If another method is used to turn on / off a outlet, the software needs to register that state
...
Lock outlet
...
There is the capability to lock an outlet so that it cannot be turned off.
...
Log power draw from outlet
...
Power draw in units of Watts.
...
Turn on / off all outlets
...
The ability to monitor, turn on, and turn off all outlets at once.
...
Remember outlet state across PDU being turned on/off
...
If the PDU is turned off and then on, the ability to have outlet states preset
...
Log SNMP connection status
...
Whether or not the communication to the SNMP is available.
16-outlet Power Distribution Unit | 1 | Eaton | EMAU05-10 |
...
Relevant Datasheets & Manuals
Description | File | Source | |||||
|---|---|---|---|---|---|---|---|
| 1 | Configure module quick start guide |
| https://www.eaton.com/us/en-us/skuPage.EMAT08-10.resources.html | ||||
| 2 | Operations Manual |
| https://www.eaton.com/us/en-us/skuPage.EMAT08-10.resources.html | ||||
| 3 | Instruction Set Systems Object Manual |
| https://www.eaton.com/us/en-us/skuPage.EMAT08-10.resources.html | ||||
| 4 | Technical Drawing |
| https://www.eaton.com/us/en-us/skuPage.EMAT08-10.resources.html | ||||
| 5 | Visio Stencil |
| https://www.eaton.com/us/en-us/skuPage.EMAT08-10.resources.html | ||||
| 6 | Double-wide Installation Quick Start Guide |
| https://www.eaton.com/us/en-us/skuPage.EMAT08-10.resources.html | ||||
| 7 | 1U and 2U rack mount installation addendum |
| https://www.eaton.com/us/en-us/skuPage.EMAT08-10.resources.html | ||||
| 8 | Original collection of KPF PDU Serial Number Tags |
| Included as these are needed for default credentials (in case of reset) |
...
Installation Instructions
Description | File | ||||
|---|---|---|---|---|---|
Change the IP address and also the login account user name and password |
| ||||
Note that SNMP is required by the KTL Eaton dispatcher, however it is not enabled by default on the Eatons.
|  |