Agitator Motor and Controller

Table of Contents:

Device List

Description	Part Number
Motor Controller	Galil DMC-30012
Motor and Encoder	Galil BLM-N23-50-1000-B

Relevant Functional Block Diagram

Software Requirements

	Action	Notes
1	Turn on motor
2	Turn off motor
3

Required Adjustable Settings (for initial setup, tuning etc.)

	Setting	Notes
1	Motor speed
2

Required Telemetry

Parameter

Report Frequency

Purpose

Notes

1

Motor RPM

once per minute (TBC)

ensures agitator is running

2

Motor current

once per minute (TBC)

ensures agitator is running properly; higher motor current could indicate wear or snags

Email from Galil:

“You can monitor the commanded current via the Tell Torque command (TT). This monitors the commanded torque or motor command signal that we are sending to the amplifier. This signal is a -10V to +10V signal. Using this with the amplifier gain (AG command) you can find what the command current is.

For example, if TTA = 2V and AGA=1 (corresponding to 0.8A/V), the commanded current to the motor is 1.6A (TT*AG or 2*0.8). Please take a look at the TT and AG commands in the controller command reference for more details.”

Required Alarms

	Parameter	Threshold	Notes
1	Motor RPM low	TBD
2	Motor current high	TBD

Relevant Datasheets & Manuals

	Description	File	Source
1
2