Skip to end of banner Go to start of banner

Agitator Motor and Controller

Skip to end of metadata

Created by Steve Gibson on Apr 09, 2020

Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

Software Requirements

	Action	Notes
1	Turn on motor
2	Turn off motor
3

Required Adjustable Settings (for initial setup, tuning etc.)

	Setting	Notes
1	Motor speed
2

Required Telemetry

	Parameter	Report Frequency	Notes
1	Motor RPM	once per minute (TBC)	ensures agitator is running
2	Motor current	once per minute (TBC)	ensures agitator is running properly; higher motor current could indicate wear or snags

Required Alarms

	Parameter	Threshold	Notes
1	Motor RPM low	TBD
2	Motor current high	TBD

Relevant Datasheets & Manuals

	Description	File	Source
1
2

No labels