Table of Contents:
Page Status
Date | Initials | Change |
|---|---|---|
April 20, 2021 | SG | First draft complete (for Will and Brad to get started with) |
Relevant Devices
Description | Qty | Source | Part Number | Notes |
|---|---|---|---|---|
Vacuum Gauge Controller | 1 | Leybold | GRAPHIX Two | Controls the gauges on the chamber |
RS-232 to Ethernet Adapter | 1 | Lantronix | UDS 2100 | This is the version with two serial ports |
Relevant Functional Block Diagram
(This device at lower right)
Software Actions
Action | Notes | |
|---|---|---|
| 1 | Read Channel 1 Pressure Value | Value reported as telemetry (see below) |
| 2 | Read Channel 2 Pressure Value | Value reported as telemetry (see below) |
| 3 | Channel 1 Gauge Status | Value reported as telemetry (see below) |
| 4 | Channel 2 Gauge Status | Value reported as telemetry (see below) |
| 5 | Set Point 1 Status | Value reported as telemetry (see below) |
Required Adjustable Settings
Setting | When Needed | Notes | ||
|---|---|---|---|---|
Build | Observing | Maintenance | ||
Telemetry Read Cadence | Yes | No | Maybe | |
Device Set-up Parameters
Required Telemetry
Parameter | Report Frequency | Purpose | Notes | |
|---|---|---|---|---|
| 1 | Channel 1 Pressure Value | Once per minute [TBD] | ||
| 2 | Channel 2 Pressure Value | Once per minute [TBD] | ||
| 3 | Channel 1 Gauge Status | Once per minute [TBD] | ||
| 4 | Channel 2 Gauge Status | Once per minute [TBD] | ||
| 5 | Set Point 1 Status | Once per minute [TBD] | Check on gate valve position |
Required Alarms
Parameter | Threshold | Notes | |
|---|---|---|---|
| 1 | Chamber pressure too low | TBD | |
| 2 |
Relevant Datasheets & Manuals
Description | File | Source | |
|---|---|---|---|
| 1 | Leybold Manual | https://www.leyboldproducts.com/media/pdf/0f/9e/dc/300550402_002_C1_GRAPHIX_123_EN.pdf | |
| 2 |
Relevant Software
Description | File | Source | |
|---|---|---|---|
| 1 | |||
| 2 |
Add Comment