Table of Contents:
Relevant Devices
Description | Qty | Source | Part Number |
|---|---|---|---|
Menlo Laser Frequency Comb | |||
Relevant Functional Block Diagram
Software Actions
Action | Notes | |
|---|---|---|
| 1 | Not applicable | - |
Note: No KPF software actions required. That is, we don’t need to control the comb, only get telemetry values from it.
Required Adjustable Settings
Setting | When Needed | Notes | ||
|---|---|---|---|---|
Build | Observing | Maintenance | ||
Not Applicable | Comb settings are set and maintained by manufacturer. | |||
Required Telemetry
Parameter | Report Frequency | Purpose | Notes | |
|---|---|---|---|---|
| 1 | f_rep | TBD | Used to define comb output frequencies | Should be written to FITS header |
| 2 | f_0 | TBD | Used to define comb output frequencies | Should be written to FITS header |
| 3 | Comb lock status | TBD | Ensure comb stability is locked. |
Required Alarms
Parameter | Threshold | Notes | |
|---|---|---|---|
| 1 | |||
| 2 |
Relevant Datasheets & Manuals
Description | File | Source | |
|---|---|---|---|
| 1 | Fiber Comb Control software User Manual | From NEID Menlo comb | |
| 2 | Software Interface Control Document for XLMRPC-protocol | From NEID Menlo comb |
Add Comment