Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 9 Next »


Table of Contents:


Introduction

Filter wheel and aperture wheel are the same device.


Relevant Devices

Descriptions

Qty

Source

Part Number

Notes

Filter Wheel

2

Thorlabs

FW102C

RS-232 connectivity

RS-232 to Ethernet Adapter

1

Lantronix

UDS2100

This is the version with two serial ports (and standard 9-pin RS-232 connectors)

Smaller Footprint Power Supply for Lantronix

1

Tri-Mag, LLC

Tri-Mag PN: L6R12H-120

DigiKey PN: 364-1264-ND

The stock Lantronix power supplies do not work well with the PDUs (as they block two extra outlets). KPF uses these replacement supplies since they only take up one PDU outlet.

Broadband Source

1

Thorlabs

SLS201L

See Broadband Calibration Sources


Relevant Functional Block Diagrams


Cable Details

Aperture Wheel System

Cable

Qty

Details

Notes

Ethernet

1

Cat6 Copper Ethernet Cable M-M, 6 feet long

Entirely within Cal Rack.

Shutter System

Cable

Qty

Details

Notes

Ethernet

1

Cat6 Copper Ethernet Cable M-M, 6 feet long

Entirely within Cal Rack.

Light Path - External Fibers

Cable

Qty

Details

Notes

Input Fiber

1

Thorlabs Custom Patch Cable
Fiber: FT1000EMT (0.39 NA; 400 – 2200 nm; 1000 um core)
Tubing: FT05SS (5mm diameter stainless steel tubing)
End 1: SMA
End 2: SMA
Length: 1 m

Output Fiber

1

Thorlabs Custom Patch Cable
Fiber: FT800EMT (0.39 NA; 400 – 2200 nm; 800 um core)
Tubing: FT05SS (5mm diameter stainless steel tubing)
End 1: SMA
End 2: SMA
Length: 20 m

Vacuum Fiber

1

A 5m-long custom version of the standard 1m Thorlabs MV64L1.

Not shown on the diagram but included for reference


Pictures of Devices

Look-up Table for Filter Wheel Aperture Positions

Position

Short Name

Part Number

Description

1

Blank Port

Thorlabs SM1PL

Externally SM1-Threaded Plug

2

6 mm aperture (f/5)

KPF-FFF-MEC-205

6 mm diameter aperture feeds fiber at f/5

3

7.5 mm aperture (f/4)

KPF-FFF-MEC-204

7.5 mm diameter aperture feeds fiber at f/4

4

10 mm aperture (f/3)

KPF-FFF-MEC-203

10 mm diameter aperture feeds fiber at f/3

5

13.2 mm aperture (0.22 NA)

KPF-FFF-MEC-202

13.2 mm diameter aperture feeding fiber at f/2.3 (sized to match NA of flat field fiber within vacuum chamber)

6

Open Port (f/1.4)

-

No aperture disk (aperture set by 22.9 mm diameter of open filter wheel port)


Relevant Datasheets & Manuals

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.