Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

Version 1 Current »

Reverse the scan direction, starting from Scan 51.

No light at all, ctr+c to abort the script at Scan 48.

Error – lenslet mask stage motor update failed

Error – multiple RPC errors

[148] osrseng@napili: ./scan3_r_200615_1 
setting speed = 300 (wait)
setting home = 1 (wait)
Waiting for mask motion to complete...:
(Time estimate = 180 sec.)

setting sfilter = Kn3 (wait)
lenslet mask stage motor update failed! because  
Error setting sfilter: ERROR - lenslet mask stage motor update failed! because  
Waiting for filter wheel to complete...:
(Time estimate = 30 sec.)

Waiting for mask motion to complete...:
(Time estimate = 180 sec.)
...
setting sscale = 0.035 (wait)
Waiting for both scale wheels to complete motion...:
(Time estimate = 30 sec.)

                        sscale = 0.035
Mask slide is ok.
Setting the exposure time to 10
osirisupAutoRamp: Frame read time is 1.4752800 seconds.
setting itime = 10000 (wait)
osirisupAutoRamp: spec itime set to 10000 ms.
setting sampmode = 3 (wait)
osirisupAutoRamp: Sampling mode set to MCDS.
setting numreads = 4 (wait)
osirisupAutoRamp: reads set to 4
setting setnum = 1 (wait)
setting framenum = 0 (wait)
setting obstype = calib (wait)
setting pos = 51 (wait)
Waiting for mask motion to complete...:
(Time estimate = 180 sec.)
..........
setting step = 100 (wait)
Waiting for mask motion to complete...:
(Time estimate = 180 sec.)

rpc_clientOpen: clnt_create failed localhost, 1868983411
clnt_call: RPC: Program not registered
rpcKey_clientFuncs.c, 3943: failed to connect to RPC server localhost,ofls (1868983411 v1)
rpcKey_clientFuncs.c, 3946: Error: failed to create RPC client handle.
ERROR - Failed to create RPC client handle for client ofls.
Sorry, the modify command was not able to contact the
control system: ERROR - Failed to create RPC client handle for client ofls.
setting comment = below scan (wait)
setting go = 1 (wait)
Waiting for exposure to end:
(Time estimate = 40040 sec.)
....................
setting go = 1 (wait)
Waiting for exposure to end:
(Time estimate = 40040 sec.)
....................
setting go = 1 (wait)
Waiting for exposure to end:
(Time estimate = 40040 sec.)
...................
setting go = 1 (wait)
Waiting for exposure to end:
(Time estimate = 40040 sec.)
...................
setting go = 1 (wait)
Waiting for exposure to end:
(Time estimate = 40040 sec.)
....................
setting step = 100 (wait)
Waiting for mask motion to complete...:
(Time estimate = 180 sec.)
.
Narrow broad band scan...
setting pos = 51 (wait)
Waiting for mask motion to complete...:
(Time estimate = 180 sec.)
..
setting comment = 51 (wait)
setting go = 1 (wait)
Waiting for exposure to end:
(Time estimate = 40040 sec.)
....................
setting go = 1 (wait)
Waiting for exposure to end:
(Time estimate = 40040 sec.)
...................
setting go = 1 (wait)
Waiting for exposure to end:
(Time estimate = 40040 sec.)
....................
setting pos = 50 (wait)
Waiting for mask motion to complete...:
(Time estimate = 180 sec.)
...
setting comment = 50 (wait)
setting go = 1 (wait)
Waiting for exposure to end:
(Time estimate = 40040 sec.)
...................
setting go = 1 (wait)
Waiting for exposure to end:
(Time estimate = 40040 sec.)
...................
setting go = 1 (wait)
Waiting for exposure to end:
(Time estimate = 40040 sec.)
....................
setting pos = 49 (wait)
Waiting for mask motion to complete...:
(Time estimate = 180 sec.)
..
setting comment = 49 (wait)
setting go = 1 (wait)
Waiting for exposure to end:
(Time estimate = 40040 sec.)
....................
setting go = 1 (wait)
Waiting for exposure to end:
(Time estimate = 40040 sec.)
....................
setting go = 1 (wait)
Waiting for exposure to end:
(Time estimate = 40040 sec.)
....................
setting pos = 48 (wait)
Waiting for mask motion to complete...:
(Time estimate = 180 sec.)
...
setting comment = 48 (wait)
setting go = 1 (wait)
Waiting for exposure to end:
(Time estimate = 40040 sec.)
....................
setting go = 1 (wait)
Waiting for exposure to end:
(Time estimate = 40040 sec.)
Control C abort detected ... Ending measure_matrix.
setting lock = 0 (wait)
setting lock = 0 (wait)
setting lock = 0 (wait)
setting lock = 0 (wait)
Turning OFF owls ...
rpc_clientOpen: clnt_create failed localhost, 1868983411
clnt_call: RPC: Program not registered
rpcKey_clientFuncs.c, 3943: failed to connect to RPC server localhost,ofls (1868983411 v1)
rpcKey_clientFuncs.c, 3946: Error: failed to create RPC client handle.
ERROR - Failed to create RPC client handle for client ofls.
Sorry, the modify command was not able to contact the
control system: ERROR - Failed to create RPC client handle for client ofls.
Control C abort detected ... Ending take_main_scans.
  • No labels