Dichroic Control
to take the dichroic out (from https://www.keck.hawaii.edu/twiki/bin/view/Main/PyWfsOpsRevert):
m obdbnmdm=home
or
m obdb=0
check with s obdb must be ~0. mm for home
to put the dichroic in as pwfs@vm-pwfsserver
prtcInsertDichroic
check with show -s ao obdb and it should show ~220. mm
Modulator:
must be between 0 and 1V
amplitudes centers
Ok: 550 0.16 0.17 0.50 0.50 0.00 90.00
channels for center: k2:ao:pmod:offsetX k2:ao:pmod:offsetY
so the position must be 0< | center + amplitude| < 1
scale is ~ 1V/arcsec
CRED2 Display
Bring up an xterm: pwfs@vm-pwfsserver (from the k2aoserver-new VNC pull down)
2. ssh -X nfiudev@nfiuserver (the usual AO password for VNC)
3. [nfiudev@nfiuserver ~]$ cd src/sce
4 [nfiudev@nfiuserver sce]$ ./psfDispTiny.py -s /tmp/TC_Display_images.im.shm
Another option is to bring up the VNC where the FIU camera is running an eavesdrop on that:
nfiuserver:2 <usual AO password>
PyWFS Quick Access
Launch with
[pwfs@vm-pwfsserver ~]$ prtcQuickAccess.py
to center the modulator:
open the loops
center modulation
PyWFS AO screens: k2aoserver-new:2
