Calibration Unit Motor Controller
- Steve Gibson
Table of Contents:
Introduction
A Galil motor controller is employed to move two motors within the Calibration Unit:
one motor is within the octagon for source selection, and
another is in a translation stage inside of the Cal Unit enclosure. It is used to move the intensity monitor into and out-of the beam.
Relevant Devices
Description | Qty | Source | Part Number |
|---|---|---|---|
Motor Controller | 1 | Galil | Galil DMC-4020(MO)-C022-I000-D4140 |
Translation Stage | 1 | Newmark Systems, Inc | MSL-50-21 |
Rotation Stage | 1 | Thorlabs | NR360S |
|
|
|
|
|
|
|
|
Relevant Functional Block Diagram
Cable Details
Pictures of Devices
Relevant Datasheets & Manuals
Description | File | Source | |
|---|---|---|---|
| 1 | Galil 40x0 Controller Datasheet |  | http://www.galilmc.com/motion-controllers/multi-axis/dmc-40x0 |
| 2 | Galil DMC-40x0 Controller Manual |  | http://www.galilmc.com/motion-controllers/multi-axis/dmc-40x0 |
| 3 | Thorlabs NR360S Rotation Stage Manual
|  | |
| 4 | Newmark MSL Series Datasheet | 
| MSL Series Linear Stage - XY Stage - XYZ Linear Slide - XY Tables |
| 5 | MSL Series Linear Stage Datasheet |  | Shipped with actual KPF device
|